One stair, ramp or check per entry, as a line of text or an object. Lengths in inches by default, or with units: 9 ft 4 in, 9'-4", 112 in, 2.8 m, 2845 mm. Stair: the total rise floor to floor, plus any of: available run ('12 ft available'), width, riser count ('15 risers'), riser height or tread depth you want, headroom, upper floor thickness, tread thickness ('2x6 treads'), stringer board ('2x10'), 'deck' or 'outdoor' (no stairwell opening). Ramp: say 'ramp' or 'wheelchair' with the rise, and optionally the slope ('1:16' or '6%'), width, landing length and available length. Check: say 'check' or 'existing' with riser height (or rise and riser count), tread depth and any of width, headroom, nosing, handrail and guard heights, 'risers vary by 1/2 in'. Houses and decks use the IRC; 'commercial', 'office', 'IBC' and similar use the IBC. Object fields: type (stair, ramp, check), rise, run, risers, riser, tread, width, headroom, floorThickness, treadThickness, stringer, slope, landing, nosing, handrail, guard, variation, outdoor, code, title, text.